Wednesday, September 8, 2010

Imitating Commercial Nutrients : A Tutorial Using HydroBuddy (my free Hydroponic Nutrient Calculator)

A few months after the first official release of my free hydroponic nutrient calculator it seems that many people are using it to imitate commercial hydroponic fertilizer formulations. Although the calculator had the capacity to do this from the time when the "salts to formulations" feature was implemented many users apparently did not know how to use this very well and the process seemed to be more extensive than what would be ideally necessary to get the end ppm concentration values of some commercial fertilizer formulations. In order to make the process far easier I decided to implement a new feature within the calculator that allows anyone to easily input the guaranteed analysis of any commercial fertilizer, the density, the amount of mL or grams added per Liter or gallon and get the end ppm values which can now be used as a recipe in order to come up with a personal formulation that exactly mimics this end result.
-
-
This new feature - as shown above- is accessible through a button in the "Desired Formulation" tab. This button is located between the water quality and instrument precision buttons, just below the "preparation type" dialogue box. When this button is clicked a new window pops up in which the user can input the percentage composition of the commercial fertilizer he/she wishes to imitate as well as the manner in which this commercial fertilizer is supposed to be added in order to arrive at the final concentrations intended by the manufacturer.

For liquid fertilizers the maker usually gives you a volume measure to add per gallon or liter which should be expressed as mL per gallon or liter (you can choose if you want to specify the quantity added per gallon or liter using the radio buttons for this purpose). In the case of solid fertilizers the label usually tells you to add a given number of grams or ounces per liter or gallon. You can choose between specifying a given volume and density or a given weight by using the "Addition as weight" or "Addition as volume" radio buttons located at the top right of the new window.

Once you input these parameters you are now ready to get the intended end result for this commercial fertilizer by using the "Calculate Formulation" button. When you click this button the program will automatically calculate the end concentrations which result from adding the amount of the commercial nutrients you specified with the composition you also specified. These values are automatically copied to the "Desired Final Formulation" column and they can now be used to imitate the commercial formulation. You can now select a given number of salts you have available and use the regular preparation types in order to come up with a direct addition or 1:100 concentrated solution which will match up the end concentration results achieved with the commercial fertilizer you input.
-
-
Of course, this will NOT guarantee a perfect copy of the commercial fertilizer since many of the ingredients a commercial fertilizer may contain may not be listed or they can be listed but their actual concentration levels may not be specified. For example you will find that many commercial nutrients contain Boron but their guaranteed analysis does not show it. This is mainly because the law does not require them to include boron in their analysis and therefore they will add it but they will not disclose its actual concentration or sometimes even its presence. Several other additives or nutrients may receive similar treatment so for this reason it is always good to make up A and B concentrated solutions or direct additions which include ALL elements necessary for plant growth.

Do you find this feature useful ? Is there any feature that you would like to see implemented in hydrobuddy ? Feel free to leave a comment with any opinion or suggestion you may have :o)

7 comments:

  1. I am making my first batch of hydroponic fertilizer. I have a two part formula and I am finished with the A part. I am now attempting to dissolve some monopotassium phosphate in some distilled water, but it is just sitting on the bottom of the bucket Im mixing it in. It isnt dissolving. Everything I read about this stuff says it is highly soluble. Do I need to use boiling water?

    ReplyDelete
  2. Hello,

    Thank you for your comment :o) You can use warm water if dissolving is becoming hard but you should have no problem with monopotassium phosphate which should easily dissolve. I would doubt the quality of the salt you currently have, you can buy a small quantity from another supplier and compare it to see if you got the right salt. I hope this helps !

    Best Regards,

    Daniel

    ReplyDelete
  3. Thanks for helping me Daniel. I bought it from Cropking, it is definately the right kind. I am attempting to dissolve 100 oz in 2.5 gallons of water. Am I using too little water?

    Thanks!

    ReplyDelete
  4. Hi,

    I think I may have solved my own dilemma. I found a web page about the solubility of various fertilizer salts.

    http://www.smart-fertilizer.com/articles/fertilizer-solubility

    The MPK that I am attempting to dissolve is soluble at a rate of 180 grams per liter at 10 degrees C. At 20 degrees C it is soluble at 230 grams per liter. I can either warm my solution or use more distilled water.

    Instead of making 5 gallon batch I will make an 8 gallon batch (4 gallons A + 4 gallons B), which should solve my problem.

    ReplyDelete
  5. Daniel, within yor calculator it has a check box for potassium hydroxide. I have potassium hydroxide flakes 100%. Is this what is listed or is it some solution of a lesser strength of potassium hydroxide?
    Also there is verying strengths of phosphoric acid, which strength is it that is within your calculator?
    sincere thanks -John

    ReplyDelete
  6. Hello John,

    Thank you for your comment :o) the values in the calculator assume a 100% purity for the chemical you want to input. If you have potassium hydroxide flakes then leave the 100 within the purity box. In the case of phosphoric acid use input the strength as w/w% on the box so if you have 50% phosphoric acid, input 50. I hope this answers your question :o)

    Best regards,

    Daniel

    ReplyDelete
  7. Hi Daniel,

    I am trying to Imitate one commercial nutrient with following data:

    Nutrient Content (w/v)
    Total Nitrogen 20.00%
    Nitrate Nitrogen 11.40%
    Ammoniacal Nitrogen 8.60%
    Phosphate 20.00%
    Potash 20.00%
    Magnesium oxide 1.50%
    Manganese (EDTA) 0.15%
    Iron (EDTA) 0.146%
    Boron 0.029%
    Copper (EDTA) 0.073%
    Zinc (EDTA) 0.073%
    Molybdenum 0.0012%
    Cobalt 0.0012%
    Kelpak 28.00%
    pH (10% solution) 4.00-5.00
    Specific gravity 1.52 @ 180 C

    Dosage Apply 3-5 mL/lit of water for foliar spray.

    When i input all the data (except cobalt and Kelpk for which there is no option) and click on calculate formulation. I dont see the result in Desired formulation page. All the ppm value changes to 0. Also i have selected 3 ml per liter.

    Please let me know if i am doing any mistake here.

    --Raurs

    ReplyDelete